Because C-Node0 is the main node for my OpenMosix cluster, I figured it needed some more hard drive space. So, I dug around and came up with this 8GB drive to install. Actually this drive came out of C-Node3 quite some time ago, when the node wasn't working. But since C-Node3 doesn't require this much space, the drive is going into C-Node0. Good? Good.

First, some gratuitous pics of the box. Big ugly thing that it is

Two NICs, vid card of unknown type, a SCSI card that I can't find drivers for to save my life, and a 33.6 modem, possibly with fax, I don't recall. Just in case you're wondering.

Yes, those are twist ties holding my case fan to my case. Can you say, future workbench post?

Inside the case shots. Such a mess. And more twist ties.

Inside the case, bottom half, pre drive installation.

The fabled "drive". Woooooooo....

Inside the case, bottom half, post drive installation. Exciting, wasn't it?

C-Node0 back in place and reconnected.

The End.